FLEX-A-LITE
-
Cold fogging equipment
-
Tank is rotationally molded and has seamless design for maximum strength.
-
Made of corrosion resistant materials for use with many chemicals.
-
2-stage motor
-
1.5 gallon capacity with 3-1/2" wide tank opening.
-
Adjustable flow rate up to 2.5 ounces/minute
-
Extension hose is 18" long
-
Variable delivery from ULV droplets to mist
-
Power-mist 56 micron droplets
-
ULV 20-35 micron droplets
-
-
Range is up to 10 meters
MY-TI-LITE
-
Cold fogging equipment
-
Tank is rotationally molded and has seamless design for maximum strength.
-
Made of corrosion resistant materials for use with many chemicals.
-
1-stage motor
-
1.5 gallon capacity with 3-1/2" wide tank opening.
-
Flow rate approximately 9 ounces/minute
-
Non-adjustable
-
Non-ULV
TRI-JET
Cold fogging equipment
Motor:
1 Hp, 50/60 Hz
Fogging Nozzle:
Three counter-rotating vortex nozzles
Particle Size:
15-30 micron VMD, adjustable
Chemicals:
Handles both oil-and water-based chemical solutions (Liquid viscosity and density affect particle size distribution)
Tank Capacity:
1 gallon
Coverage:
8-12 ft.
Weight:
12 lb
Sprayer Type:
Stainless Steel
Tank Size:
1 gallon
Wand Length:
9 in.
Hose Length:
48 in.
Spray Pattern:
4-way tip
-
Coarse fan - 14.1 oz/min
-
Fine fan - 6.4 oz/min
-
Pin stream
-
8.9 oz/min (large)
-
4.5 oz/min (small)
-
-
With crack and crevice straw
N124
Gasoline Powered Backpack Fogger
ULV
Motor:
Honda 4-stroke - No need to mix oil with the gas
Power:
1.3hp
Solution Tank Capacity:
3.8 liter
Flow Rate:
118.3mL/min at ½ open position of the nozzle
Weight:
11.8kg (approx.)
Fuel Capacity:
0.63 liter
Adjustable Nozzle:
From very fine to heavy fog
3 Stage Rotary Blower:
Creates high pressure air for optimum atomization of liquid
VERSA-FOGGER
Thermal fogging equipment
Fuel Tank:
Stainless steel capacity-approx. 1.4 liters.
Fuel:
Unleaded
Fuel Consumption:
Approx. 2 litre/hr.
Chemical Tank:
Capacity 7.0 litres (polyethylene)
Ignition:
-
Electronic ignition coil
-
4 dry batteries
-
1.5v each in series negative on ground
Output:
-
0.8 (14 litres/hr)
-
1.0 (20.5 litres/hr)
-
1.2 (27 litres/hr)
Weight:
8.7 kg
Power:
25.4 hp
SN 50 PE
Cold fogging equipment
Fuel Tank:
Polyethylene, capacity approx.0.9 liters
Fuel:
Unleaded gas with 2T oil
Fuel Consumption:
Approx. 0.85 litre/hr.
Chemical Tank:
Polyethylene, capacity approx. 3 liters
Output:
-
30 (1 litre/hr)
-
45 (2 litres/hr)
-
58 (3 litres/hr)
-
64 (4 litres/hr)
Range:
10 m (indoor), 15 m (outdoor)
Droplet Size:
VMD < 30 um
Weight:
12.3 kg
Power:
2.0 hp
PORTASTAR
Hand-held foamer
Material:
Stainless Steel
Capacity:
3.8 liters
Pressure:
35-40 psi (by hand pump)
How to Use:
-
Just add chemical and foaming agent
-
1 gallon
6 in. Curved Tip:
-
Great for wall voids and joints
-
Most replacement parts are interchangeable with the standard B&G 1 gallon sprayer
Pump:
25-30 strokes
Foaming Agent:
29.5ml-88.7ml : 3.8 liters solution
VERSAFOAMER HH
VERSAGUN 435
-
Soil injector
-
Required pressure: 20 psI
-
This multiple-purpose gun can be used for:
-
Broadcast spraying
-
Injecting termiticide into perimeter soil
-
for treating voids and soil beneath concrete slabs
-
-
They are suitable for treating soil beneath inside or outside concrete slabs using the 7/16 inch pipes and for treating soil around the perimeter of buildings using the 5/8 inch pipe.
-
The pipes have tip-shutoff and they are suitable for use indoors.